Controlling Usage Per User - Samsung WEC8500 Operation Manual

7.6

Controlling Usage per User

A wireless terminal can control traffic usage per user by receiving a QoS profile that
specifies traffic usage (bandwidth) from the RADIUS server at the authentication stage.
You can configure upward and downward usage per wireless terminal.
Configuration using CLI
The procedure of configuring a usage to a profile is as follows:
1) Go to the configure mode of the CLI.
APC# configure terminal
2) Create a QoS profile.
APC/configure# qos [PROFILE_NAME]
APC/configure/qos samsung#
Parameter
PROFILE_NAME
3) Configure the downward usage in kbps.

bw-contract-downstream [VALUE]
Parameter
VALUE
4) Configure the upward usage in kbps.

bw-contract-upstream [VALUE]
Parameter
VALUE
5) To check the configured profile information, use the 'show qos profile' command.
© SAMSUNG Electronics Co., Ltd.
CHAPTER 7. WLAN Additional Services
Description
Name of a QoS profile to create
Description
Downward usage
Description
Upward usage
page 335 of 689