Smt-R2000 Configuration - Samsung SMT-R2000 User Manual

CHAPTER 1. Introduction of SMT-R2000

1.2 SMT-R2000 Configuration

This section describes the configuration of SMT-R2000.
1.2.1 Front Panel of SMT-R2000
The front panel of SMT-R2000 is as shown in the figure below:
The following table describes each LED of the front panel:
LED Function
WAN WAN operation
status
LAN LAN operation
status
2.4 GHz 2.4 GHz operation
status
5 GHz 5 GHz operation
status
PWR Power supply
status
1-2
Figure 1.1 Front Panel of SMT-R2000
Table 1.1 LEDs of SMT-R2000
Blue LED turns on
WAN is in normal
operation
LAN is in normal
operation
2.4 GHz Wireless
LAN is in operation
5 GHz Wireless
LAN is in operation
Power supply is
normal
Blue LED turns off Blue LED blinks
WAN fails to Data is being
operate transmitted/received
through WAN
LAN fails to operate Data is being
transmitted/received
through LAN
2.4 GHz Wireless Data is being
LAN fail to operate transmitted/received
through 2.4 GHz
Wireless LAN
5 GHz Wireless Data is being
LAN fail to operate transmitted/received
through 5 GHz
Wireless LAN
Power supply fails -
© SAMSUNG Electronics Co., Ltd.