1) Step 1:
Setup Firewall enable/disable.
If there is no Firewall License, can't set to enable.
2) Step 2:
Setup Firewall Policy.
3) Step 3:
Setup NAT Pool.
4) Display Setup result
After finishing all setup, displays results.
2.4.4
Redundancy Setup Wizard
In the menu bar of <WEC Main window>, select <Configuration> and then select
<Wizard> <Redundancy> menu in the sub menu.
For step 1, start WLAN Setup.
Description on the Screen
© SAMSUNG Electronics Co., Ltd.
Figure 31. Redundancy Setup Wizard Step. 1
CHAPTER 2. Basic System Configuration
page 58 of 689