Figure 157. 802.11A/N/Ac Datarates - Samsung WEC8500 Operation Manual

Wireless enterprise access point controller

Hide thumbs Also See for WEC8500:

Table of Contents

[Data Rates]

The data rate selection options are as follows:

Basic: Basic rate supported for a terminal to connect to an AP.

Supported: A connected terminal that supports the supported rate can communicate

with an AP at the supported rate.

Data Rates: data rate

 Range for 80211a: 6, 9, 12, 18, 24, 36, 48, or 54 Mbps

 Range for 80211bg: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54 Mbps

Select <Configuration> in the menu bar of <WEC Main Window> and select <WLANs>

 <WLANs>  <802.11a/n/ac> or <802.11b/g/n> in submenus to configure Data Rates.

Select <Configuration> in the menu bar of <WEC Main Window> and select <Radio>

 <802.11a/n/ac> or <802.11b/g/n> in submenus to configure Data Rates.

An example of selecting 802.11a/n/ac is shown below.

Figure 157. 802.11a/n/ac DataRates

CHAPTER 6. Wi-Fi Configuration

page 284 of 689