11) Configure the bandwidth of the AP. Bandwidth can be configured only for 80211a/n/ac.
bandwidth [BANDWIDTH] ap [AP_ID]: Bandwidth is configured for a specific AP.
bandwidth [BANDWIDTH] global: Bandwidth is configured for all APs.
Bandwidth [BANDWIDTH] group [GROUP_ID] all-ap/active-ap: Bandwidth is
configured for multiple Aps in the group.
Parameter
BANDWIDTH
AP_ID
GROUP_ID
all-ap
active-ap
Configuration using Web UI
In the menu bar of <WEC Main window>, select <CONFIGURATION> and then select
the <ACCESS POINTS> <802.11a/n> or <802.11b/g/n> menu in the sub-menus.
An example of selecting 802.11a/n is shown below.
The configuration items are as follows:
[AP Service Configuration]
SERVICE: Enable or disable the radio service.
© SAMSUNG Electronics Co., Ltd.
- 20: 20 MHz
- 40: 40 MHz
- 80: 80 MHz
- 160: 160 MHz (to be supported in the future)
- 8080: 80 + 80 MHz (to be supported in the future)
ID of the AP (range: 1-3000)
ID of the AP group
Applies to all APs in the group
Applies to all live APs in the group
Figure 155. 802.11a/b/g/n radio (1)
CHAPTER 6. Wi-Fi Configuration
Description
page 282 of 689