Captive Portal - Samsung WEC8500 Operation Manual

8.3

Captive Portal

The W-EP WLAN system provides the Captive Portal function. A Web Certified user can
receive a normal service after connected to a specific WLAN (SSID) and going through
user authentication.
8.3.1 Configuring Web Authentication User
Configuration using CLI
To configure Web authentication User, go to the Configure mode and execute the command.
1) Go to configure  security  captive-portal configuration mode of CLI.
APC# configure terminal
APC/configure# security
APC/configure/security# captive-portal
APC/configure/security/captive-portal#
2) The command to add a web authentication user is as follows:

Web-auth-users add [ID] [PASSWD] [START_TIME] [END_TIME]
Parameter
ID
PASSWD
START_TIME
END_TIME
3) The command to add a web authentication user is as follows:

Web-auth-users delete [ID]
Parameter
© SAMSUNG Electronics Co., Ltd.
Login ID of a user
Password
Start time (YYYY-MM-DD:HH:MM:SS format)
End time (YYYY-MM-DD:HH:MM:SS format)
ID
CHAPTER 8. Security
Description
Description
User ID
page 409 of 689