Figure 227. Wlan Web Policy Configuration Window - Samsung WEC8500 Operation Manual

Wireless enterprise access point controller

Hide thumbs Also See for WEC8500:

Table of Contents

CHAPTER 8. Security

Configuration using Web UI

In the menu bar of <WEC Main window>, select <Configuration> and then select the

<WLANs> menu in the sub-menus. Select a WLAN ID in the WLANs screen and go to

<L3> on the <Security> tab.

Enable <WEB POLICY>, select the Web Authentication option, and specify the Pre-Auth

ACL configured in the ACL for <PRE-AUTHENTICATION ACL>. Specify a web page

type to authenticate.

Select <Server Type>, and select a Radius server to perform authentication from

<Primary/Secondary Radius Server>.

Enable the operation after authentication and configure <URL>.

For details on <Derivation Profile Name> configuration, see the section on 8.7.2

Derivation Profile Configuration in this document.

Figure 227. WLAN Web Policy Configuration Window

page 415 of 689