Voice Optimization Configuration - Samsung WEC8500 Operation Manual

6.2.4

Voice Optimization Configuration

The APC configures an EDCA parameter value that is optimized for voice service to an AP
in real-time.
Configuration using CLI
1) Go to configure  radio cvo mode to configure of CLI.
APC# configure terminal
APC/configure# [80211a|80211bg] cvo
APC/configure/80211a/cvo#
2) Enable or disable the function.

[no] enable [ap <AP ID> | global | group <group ID>]
Parameter
AP ID
group ID
3) To check the configured information, use the 'show [80211a | 80211bg] cvo config [ap
<AP ID> | group <group ID> | global]' command.
Configuration using Web UI
1) Configure for each Radio
In the menu bar of <WEC Main window>, select <CONFIGURATION> and then
select the <RADIO>  <802.11a/n> or <802.11b/g/n>  <General> menu in the
sub-menus.
© SAMSUNG Electronics Co., Ltd.
ID of AP (range: 1~3000)
ID of AP group (range: 1~3000)
Figure 166. Configuring voice optimization by radio
CHAPTER 6. Wi-Fi Configuration
Description
page 297 of 689