Retrieving Current Alarm - Samsung WEC8500 Operation Manual

10.4.1 Retrieving Current Alarm

All the system alarms are basically recorded into a system log. The procedure of retrieving
current alarms is as follows:
Retrieving with CLI
To retrieve current alarms, execute the command as follows:
WEC8500# show alarm list all
1 network
AdminStatus[up] OperStatus[down]
2 network
AdminStatus[up] OperStatus[down]
3 network
AdminStatus[up] OperStatus[down]
...
To selectively retrieve a group or level, execute the command as follows:
WEC8500# show alarm list group network
1 network
AdminStatus[up] OperStatus[down]
WEC8500# show alarm history level major
1 network
AdminStatus[up] OperStatus[down]
Retrieving with Web UI
To retrieve the list of current alarms, in the menu bar of <WEC Main window>, select
<Monitor> and then select the <Active Alarm> menu in the sub-menus.
© SAMSUNG Electronics Co., Ltd.
2012-12-17 09:56:13 MAJ APC ge8 1301 NET Link dn
2012-12-17 09:56:13 MAJ APC xe1 1301 NET Link dn
2012-12-17 09:56:13 MAJ APC xe2 1301 NET Link dn
2012-12-17 09:56:13 MAJ APC ge8 1301 NET Link dn
2012-12-17 09:56:13 MAJ APC ge8 1301 NET Link dn
Figure 275. Current alarm
CHAPTER 10. System Management
page 485 of 689