Figure 64. Igmp Snooping Config Window - Samsung WEC8500 Operation Manual

[ip igmp snooping mroute]
This command enables or disables the Mroute function.

ip igmp snooping mroute [INTERFACE]

no ip igmp snooping mroute [INTERFACE]
Configuration using Web UI
In the menu bar of <WEC Main window>, select <Configuration> and then select the
<Controller>  <Multicast>  <IGMP Snooping> menu in the sub-menus.
[Config]
Enables or disables the IGMP Snooping function or configures related functions.
To perform configuration for STATE, FAST LEAVE, QUERIER STATE, or REPORT
SUPRESSION STATE, select Enable or Disable and click the <Apply> button.
[Mroute]
The PIM-SM initial window is shown below. When you click the <Add> or <Delete>
button, you can add or delete PIM-SM configuration.
1) In the PIM-SM initial window, click the <Add> button.
2) Click the <Select Vlan> button.
© SAMSUNG Electronics Co., Ltd.

Figure 64. IGMP Snooping Config Window

Figure 65. IGMP Snooping Mroute Creation Window (1)
Figure 66. IGMP Snooping Mroute Creation Window (2)
CHAPTER 3. Data Network Function
page 142 of 689