Statistics Function - Samsung WEC8500 Operation Manual

10.12.9 Statistics Function

It provides the statistics calculation function for statistics for group optimization.
It collects statistics for each statistical item by AP/radio, radio, WLAN (SSID), device type,
and RF and again by time interval. The time intervals include 5 minutes, one hour, and 24
hours and the statistical value calculated by time is displayed when the statistics items are
retrieved in WEC and CLI.
VoIP Statistics
It shows relevant statistics if VoIP is used with the SIP FMC terminal.
Configuration using CLI
1) Enable VoIP Statistics.
WEC8500/configure/network-stats/statistics/voip# enable
2) If the call setup, call drop, and MoS values of specific APs are monitored for a
specific time and such values fail to reach the reference values, an event can be
generated.
ex.) call-setup: If the call setup success rate is less than 50 %, an event is generated.
../network-stats/alert/voip/call-setup# enable
../network-stats/alert/voip/call-setup# threadhold 50
3) Retrieve the status of configuration of the VoIP statistics.
WEC8500# show network-stats statistics voip configuration
4) Retrieve the status of configuration of the VoIP alert.
WEC8500# show network-stats alert voip configuration
5) Retrieve call statistics by radio.
WEC8500# show network-stats statistics voip radio
6) Retrieve call statistics by AP.
WEC8500# show network-stats statistics voip ap
© SAMSUNG Electronics Co., Ltd.
CHAPTER 10. System Management
page 525 of 689