Allied Telesis AT-AR3050S Command Reference Manual page 1142

BGP BGP4+ C
AND OMMANDS
( BGP BGP4+)
REDISTRIBUTE INTO OR
The following example shows the configuration of a route-map named rmap2,
which is then applied using the redistribute route-map command.
awplus#
awplus(config)#
awplus(config-route-map)#
awplus(config-route-map)#
awplus(config-route-map)#
awplus(config)#
awplus(config-router)#
Note that configuring a route-map and applying it with the redistribute route-map
command allows you to filter which router are distributed from another routing
protocol (such as OSPF with BGP). A route-map can also set the metric, tag, and
metric-type of the redistributed routes.
C613-50077-01 REV A
configure terminal
route-map rmap2 permit 3
router ospf 100
redistribute bgp route-map rmap2
Command Reference for AT-AR3050S
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
match interface vlan1
set metric-type 1
exit
1142