Steering Wheel Removing-Refitting; Stalk Unit Release Removing-Refitting - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

S T E E R I N G WHEEIRemoving-refitting

Remove the air bag module from the

steering wheel as described in

Unscrew the nut retaining the steering

wheel to the steering column, the discon-

nect the horn electrical connection and re-

move the steering wheel.

Mark the positions of the steering wheel

hub and steering columns and remove the

steering wheel.

During the operation, take care NOT

The clock spring is fitted with a safety

clip to prevvent the lower and upper

plates turning in relation to one an-

other when the steering wheel is not

fitted in the car. This is achieved

springs (1), which close as shown

Remove the clock spring as described

S T A L K U N I T - R E L E A S E

Remove the stalk unit-release as follows:

3. Use a socket wrench to loosen the bolt of

the stalk unit-release retaining collar and

4. Disconnect electrical connectors from the

stalk unit-release and remove.

THE STEERING

Removing-refitting