Auto transmission and differential
Description and operation
21-27.
36
Hydraulic test
To measure the line pressure, proceed as fol-
lows:
- place the car on ramps, then working from
under the vehicle remove the gearbox oil
screw plug and screw in its place the con-
nector 1860870000;
- pass the pipe 1895411000 from the t o p of
the engine compartment so as to connect
one end of the pipe to the connector
1860870000, and connect the other end to
the pressure gauge 1895424000. Position
it so that it is visible from the driver's seat;
P4A36AB03
P4A36AB04
Bravo-Brava
Publication no. 506.670/06
i g j u e .