Fiat Bravo Service Manual page 464

Engine
Fuel system
10.
52
Bravo-Brava I 0 i 16v
1. Undo the bolts jointing the t w o sections of
the inlet manifold and remove the first sec-
tion (1).
2. Undo the bolts securing the fuel supply
manifold and the bolts securing the second
section of the inlet manifold to the engine
block, and remove it.
3. Remove the fuel pipe and remove the man-
ifold complete with fuel injectors.
4. Then remove the fuel injectors as follows:
- Disconnect the electrical connector ( 1 ) .
- Remove the safety clip ( 2 ) .
- Remove the fuel injector ( 3 ) , w h i c h is a
press fit.
A
Never pull the electrical connector
to remove the injector.
Before refitting, check the condition
of the seals.
'98 range
Publication no. 506.670/14