Removing - Refitting Lambda Probe - Fiat Bravo Service Manual

Engine
Fuel system
10.
50
Bravo-Brava < Q k l 6 v

Removing - refitting lambda probe

- Place the car on ramps.
- Disconnect the battery's negative cable.
- Disconnect the wiring connector installed
against the rear wall of the engine compart-
ment.
Remove the Lambda probe from its seating
on the exhaust pipe.
When refitting, smear
TERIA-BORON
SPARK PLUG CO-LTD. grease on the
threaded part.
E
Tightening torque 3.5 - 4.5 daNm
'98 range
ANTISEtZEMA-
NITRIDE N.G.K.
Publication no. 506.670/14