Bravo-Brava 1747 16V - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Introduction

Planned maintenance

Bravo-Brava 1747 16v

Position the vehicle on a lift, then:

- disconnect the negative battery lead;

- remove the right front wheel;

- remove the right wheel arch liner.

Loosen the tension for the auxiliary shaft

drive belt acting in an anti-clockwise d i -

rection on the centre nut for the automatic

tensioning device to release the spring m-

side the actual device; then fit the belt.

2. Remove the fixed pulley for the auxiliary

shaft drive belt, then undo the upper and

lower bolts fixing the timing belt shield

and remove it.

3. Remove the cover for the ignition coils,

disconnect the connections from the coils,

the earth cable (1) and the oil vapour re-

covery pipe from the cylinder head cover.

4. Disconnect the connector from the air

conditioning compressor, release the ca-

ble and remove the cylinder head cover

acting on the fixing bolts s h o w n in the d i -