Fiat Bravo Service Manual page 535

Auto transmission & differential
Removing-refitting
21-27.
58
Bravo-Brava
Remove the guard shown in the figure
from the bottom of the gearbox.
Remove the bolts securing the converter
to the flywheel. First undo the t w o visible
bolts, then turn the crankshaft to gain ac-
cess to the remaining bolts (total of 6 ) .
3.
Undo the bolt shown in the fibure from
the valve assembly cover to allow the
gearbox support tool to be installed.
4-5. Place the gearbox
1860873000 on a hydraulic jack, then
secure it to the gearbox at the points
shown in the figure. To fit the tool cor-
rectly, also fit a bracket ( 1 ) , to be manu-
factured on site, of the dimensions
shown in the insert (dimensions in
mm).
ft
16v
support tool
Publication no. 506.670/07