Fiat Bravo Service Manual page 548

Hide thumbs Also See for Bravo:

Table of Contents

Gearbox and differential

Removing-refitting

R E M O V I N G - R E F I T T I N G

Position the vehicle on a lift, remove the front

wheels then proceed as described below:

Undo the three fixing bolts and remove

the air intake disconnecting it firstly from

the air filter.

Disconnect the negative battery lead, re-

move the protective cover for the positive

pole, disconnect the terminal and separate

the latter from the starter motor supply

leads; undo the nut securing the battery to

the drip tray, then remove the latter from

the engine compartment.

3. Undo the bolt securing the relay casing

cover and remove it, then undo the nuts

fixing the casing to the battery drip tray

and place the casing at the side.

4. Remove the battery drip tray undo the

bolts fixing it to the bodyshell.