Bravo-Brava @ i
Copyright Fiat Auto
12v
P4A25DA02
Braking system
Hydraulic operation
1. Disconnect the brake fluid inlet pipes from
the reservoir from the brake pump.
2. Use wrench 1856132000 to disconnect
the brake pipe fittings from the brake
pump.
Bleeding brake system
3. Unscrew both nuts retaining the brake
pump to the brake servo, then remove the
pump from the car.
Reverse removal instructions to refit,
making sure that the brake pump is
properly fitted to the brake servo rod
and washer.
3 3 .
5