Bravo-Brava
Copyright Fiat Auto
D I S T R I B U T O R HEATER A S S E M B L Y
Removing - ref itti ng
1. Working from the lower rear of the engine
bay, loosen both clips arrowed in the figure
and disconnect both rubber pipes from the
metal ends of the heater radiator.
2. Release the air bag lead from the retaining
brackets.
3. Disconnect electrical connection located
alongside the clutch pedal.
4. Disconnect electrical connections located
alongside the cabin fan.
P4A47DA04
Auxiliary units
Heater with manual controls
Drain the cooling system, then re-
move the facia and central tunnel trim
as described in Section 70.
50.
1