Fiat Bravo Service Manual page 75

Hide thumbs Also See for Bravo:

Table of Contents

Introduction

Planned maintenance

1. Move the connections and the cables

shown in the diagram aside, then undo

the nuts fixing the brake servo vacuum

pump to the cylinder head and remove it.

2. Position tool 1860934000 for timing the

camshaft, matching the splining (1) for

the camshaft w i t h the projection (2) on

Fix the tool to the cylinder head placing

the centering dowel (3) as illustrated in

the diagram. The dowel should be per-

fectly centered on the tool; if it is not, use a

spanner (4) to centre the dowel on the

tool using extremely small movements.

3. Remove the bolt shown in the diagram

crankcase. Then fit the timing drive belton

the crankshaft drive gear only.

4. Position tool 1860933000 for accurately

determining T.D.C. for cylinder no. 1. The

tool should be perfectly fixed to the

crankshaft drive gear using t w o bolts and

using another bolt to the crankshaft front

cover (for the bolt removed previously).

Then loosen the bolt fixing the camshaft

drive pulley using tools 1860831000 and