Adjustment Of Balance Between Front And Rear Speakers (Fader); Loudness Function; Mute Function; Radio Function - Fiat Bravo Service Manual

Electrical equipment
Radio equipment
55.
flUTE OH flUTE OFF
40
DIOmU. STEREO
LOUD
P4A40HL03
XI 98
Adjustment of balance between front and
rear speakers (FADER)
By selecting the FADER function it is possi-
ble to modify the "distribution of the volume"
between the front and rear speakers.
The FADER function is selected by pressing
the AUDIO button (1) once or more until the
message "FAD 0" appears on the display.
The VOL control (2) is used to adjust the in-
tensity of the sound, accentuating the sound
coming from the front speakers or from the
rear speakers.
L O U D N E S S function
The LOUDNESS function involves improving
the sound w i t h the volume turned d o w n .
By pressing the LOUD button (1) this func-
tion is activated and the message " L O U D "
appears on the display.
To deactivate the function activated previ-
ously, simply press the LOUD button (1)
again.
M U T E function
By pressing the AUDIO button (1) for about
3 seconds, the MUTE function is selected
and the message "MUTE O N " appears on the
display (diagram below).
To deactivate this function, the A U D I O but-
ton has to be pressed again. The message
"MUTE OFF" will appear on the display.
When the Mute function is selected, the radio
no longer sends any signals to the speakers.

RADIO function

Reception
stantly whilst
can be interefered with by the pres-
ence of
bridges, especially when the trans-
mitter is far away.
IMOTE When the "RADIO" function is acti-
vated, the last station listened to be-
fore switching off is received.
Update
Bravo-Brava
9ft range
conditions vary con-
driving. Reception
mountains, buildingsor
Print no. 506.670/17