Gear Change Lever Position Sensor - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Auto transmission and differential

Servicing and adjustments

GEAR CHANGE L E V E R P O S I T I O N S E N -

Remove the air intake duct, battery, relay and

fuse box (move it to one side) the i.e. control

unit and battery cage, as described for the re-

moval of the gear change cable, position the

selector lever at P, then carry out the follow-

ing operations:

1. Disconnect the wiring connector from the

gear change lever position sensor.

Remove the split pin and washer so as to

disconnect the gear change cable from the

lever on the sensor.

Undo the nut securing the lever to the

sensor, then remove the lever.

Release the central nut from the washer

and remove the nut, then undo the t w o

side bolts securing the sensor and remove

Publication no. 506.670/06