Removing-Refitting Pipe Connecting Clutch Pump - Slave Cylinder - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Clutch operation

R E M O V I N G - R E F I T T I N G PIPE C O N N E C T -

ING C L U T C H PUMP - S L A V E C Y L I N D E R

1. Unscrew the fitting of the line connecting

the pump to the slave cylinder on the

clutch pump.

2. Disconnect the leads from the battery

negative terminals, then remove by u n -

screwing the nut securing the retaining

3. Remove the relay box cover, then unscrew

the nut retaining the box to the battery

cradle and position to one side.

4. Release the electrical leads shown in the

figure from their retaining clips, then re-

move the battery cradle by undoing the re-

taining bolts indicated.

Working inside the engine bay, re-

move the same parts as removed to

disconnect the clutch pump to gain

access to the fitting of the line con-

nected to the slave cylinder on the

Publication no. 508.876