Fiat Bravo Service Manual page 71

Hide thumbs Also See for Bravo:

Table of Contents

Introduction

Planned maintenance

1. For the 1910 TD 100 version, loosen the

bolts fixing the injection pump pulley and

rotate it until pin 1860965000 can be i n -

serted at the point shown.

2. Complete the fitting of the timing belt ob-

serving the following order:

1. Crankshaft gear

2. Fixed pulley

3. Timing pulley

4. Injection pump pulley

5. Automatic tensioner

6. Water pump

For all the pre and post modification engines

the new belt can be fitted and timed by f o l -

lowing the alignment of the transverse refer-

ences (A) on the back of the timing belt and

the references on the pullies.

NOTE Fit the belt so that the arrow is point-

ing in the direction of rotation of the

3. Exert force at the point shown on the au-

tomatic tensioner placing the tensioner

moving reference (1) in the maximum

tension position, then lock the belt ten-

sioner fixing nut.

4. For the 1910 TD 75 version, release the

injection pump drive pulley by undoing

the three bolts positioned previously.