Loc Function; Mono Function - Fiat Bravo Service Manual

Electrical equipment
Radio equipment
5 5 .
74
Automatic programme change ( R E G I O N -
AL)
When the RDS programme consists of vari-
ous regional
switch between transmitters, selecting the
one w i t h the most powerful signal.
The frequency selection buttons required are
button 5 (1) for switching the function on
and button 4 (2) for switching it off.
The messages displayed will be "RES O N "
when the function is switched on and "RES
OFF" when the function is switched off.

LOC function

This makes it possible to search for FM fre-
quencies according to their
power.
With the LOC function selected, the radio
system searches for the most power broad-
casting stations whilst if the function is not
selected the search is also extended to less
powerful transmissions.
To activate the LOC function, press the fre-
quency selection button 5 (1) until the mes-
sage "LOC O N " appears on the display. To
deactivate the function selected previously,
press frequency selection button 4 (2) until
the message "LOC OFF" appears on the dis-
play.

MONO function

The M O N O function makes it possible to set
the radio equipment to stereo or mono repro-
duction. In the case of a stereo broadcast,
there are t w o different channels, whilst in the
case of a MONO broadcast there is one chan-
nel only. For good quality sound, the setting
should correspond to the type of transmis-
sion (Stereo or M O N O ) .
To select the MONO function, press frequen-
cy selection button 5 (1) until the message
" M O N O O N " appears on the display. To de-
activate the MONO function, press the fre-
quency selection button (2) until the mes-
sage " M O N O OFF" appears on the display.
XI-98 - Update
Bravo-Brava
98 range
broadcasts, the radio
transmission
Print no. 506.670/17
may