Pre-Setting Volume Level For Tp Function (Traffic Program) - Fiat Bravo Service Manual

Electrical equipment
Radio equipment
5 5 .
Point b)
If you wish to receive traffic news, before inserting the audio cassette, tune into an RDS TP transmitter.
If traffic news is broadcast whilst listening to a cassette, the reproduction of the tape will be temporarily
halted and resumed automatically when the news flash is over.
Point c)
Even when not listening to the radio it is possible to receive traffic news. After having tuned into an
RDS TP transmitter and set the volume at zero, if this transmitter broadcasts traffic news it can be heard
at a pre-set minimum volume.
In some countries there are radio stations which, even if the TP function is activated, do not
transmit traffic news.
68
Point a)
To select a transmitter w i t h a traffic news ser-
vice, press the TP (1) button briefly. The
message "TP" will appear on the display.
If the transmitter is not enabled to provide
traffic news, the radio will automatically tune
into the closed enabled broadcaster
transmit it.
Several transmitters, providing a traffic news
service, can be programmed using the station
selection buttons. Follow the instructions in
the "Transmitter manual tuning and program-
ming" paragraph, initially pressing the TP
button to activate the TP function.
As an alternative to the manual programming,
it is possible to follow the instructions in the
"Transmitter automatic programmein ( A U -
TOSTORE)" paragraph.
Pre-setting volume level for TP function
(Traffic Program)
To select the volume for listening to traffic
news, press the EXP button (1) until the
message "EXPERT" appears on the display.
Then press the " A " " T " buttons (2,3) until
the message "TA VOL" appears on the dis-
play. Using buttons 4 (4) and 5 (5) it is pos-
sible to select the desired volume. The v o l -
ume ranges between 5 and 3 1 .
P4A68HL02
XI-98 - Update
Bravo-Brava
98 range
and
Print no. 506.670/77