Positioning Of Front Wheel Sensor; Positioning Of Rear Wheel Sensor - Fiat Bravo Service Manual

Braking system
Active sensors
3 3 .
The recommended distance (gap), to obtain the correct signals, between the end of the sensor and the
multi-polar ring should be between:
This distance cannot be adjusted therefore if the gap measured is outside of the tolerance, check the
condition of the sensor and the multi-polar ring.
N O T E Each time an rpm sensor is fitted, it should be lubricated with water-repellant
the effects of heat variations, over a period of time, causing deterioration and making it difficult
to extract.
P o s i t i o n i n g of f r o n t w h e e l s e n s o r
P o s i t i o n i n g of rear w h e e l s e n s o r
Version w i t h drum brakes
1. Active sensor
2. Multi-polar ring
8
0.16 -1.71 m m f o r t h e f r o n t w h e e l s
0.37 - 1.13 m m f o r t h e rear w h e e l s
Version w i t h disc brakes
P4A08BD03
Bravo-Brava
98 range
grease, to avoid
P4A08BD05
Print no. 506.670/17