Gearbox and differential
Removing-refitting
21.27
2
1. Disconnect the connector for the revers-
2. Acting on the nut (1) and the lock nut ( 2 ) ,
3. Disconnect the end of the gear engage-
4. Disconnect the end of the gear selection
5. Undo the upper bolts (1) fixing the gear-
the starter motor to the gearbox.
P4A02BB04
Bravo-Brava
ing lights switch and the earth cable.
disconnect the clutch cable from the con-
trol lever.
ment cable and undo the bolts fixing the
mounting bracket.
cable, then move the selection and en-
gagement cables to the side of the engine
compartment.
box to the engine and the bolt (2) fixing
ft
16v
98 range
P4A02BB02
P4A02BB05
Print no. 506.670/17