Dismantling At The Bench - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Gearbox and differential

External controls

1. Undo the front and rear bolts fixing the

support for the external gearbox controls

and handbrake.

- Carefully lower the external controls sup-

port assembly from its housing, then re-

move the cables from the engine compart-

ment and extract the assembly from the ve-

DISMANTLING AT T H E B E N C H

2. Remove the gear lever assembly, undoing

the bolts, then remove the rubber cable

3. Remove the t w o clips securing the cables

to the lever support.

4. Disconnect the cables from the lever sup-

port: the engagement one is a press fit and

the selector one is fixed by a circlip.