Fitting Timing Drive Belt - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Introduction

Planned maintenance

1. Loosen the automatic tensioner bolt, re-

leasing the belt tension, then remove it.

Fitting timing drive belt

2. After having removed the tappet cover,

loosen the bolt fixing the camshaft drive

pulley using spanner 1860831000; fit the

toothed belt on the crankshaft gear and

remove the t w o bolts illustrated fixing the

oil pump to the crankcase.

3. Place tool 1860901000 in position, en-

suring that the opening (1) in the tool c o -

incides with the dowel on the crankshaft

gear; in this position cylinder no. 1° is at

4. Remove the bolts fixing the 1 st - 2nd - 3rd

and 4th timing caps, exhaust side, loosen

the inlet side ones, raise the lubrication

duct, remove the 2nd cap and place tool

1860899000 for timing the camshaft in

the housing, then tighten all the caps to a

pre-torque of 1 daNm.

Work with due care when raising the

lubrication duct to avoid the duct be-

ing distorted or broken.