Brake-Clutch Fluid Reservoir - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Braking system

Hydraulic operation

B R A K E - C L U T C H F L U I D R E S E R V O I R

Removing - refitti ng

1. Remove the upper cam cover protection.

2. Release the diesel lines from the retaining

clip, then remove the trim s h o w n in the

figure by undoing the retaining bolts.

3. Disconnect fluid level sensor connector

and remove the reservoir cap, then drain

the brake fluid from the reservoir using a

4. Disconnect the hydraulic clutch line from

the reservoir, then separate the reservoir

from the brake pump and lift out.

Ensure fluid remaining in the reser-

voir does not leak out.

Carry out brake and clutch fluid reservoir

removal operations in reverse order to re-

the reservoir

clean before filling.

Bleeding hydraulic brake and clutch