Kick-Down Switch - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

transmission & differential

1. Fit the valve assembly cover and tighten

The bolts securing the valve assembly

cover are of different lengths.

the bolts as shown in the figure

them to a torque

NOTE Fit the gearbox oil drain plug and tighten

to a torque of 2.35-5.49 daNm. Top up

the oil level, then check that there are no

oil leaks from the valve assembly cover

or drain plug.

Finish refitting the valve assembly by revers-

ing the procedure for removal.

KICK-DOWN S W I T C H

The kick-down switch is located on the ac-

celerator pedal. To remove this switch, re-

lease the lugs which secure the switch to the

mounting bracket. Disconnect the supply

connector ( 1 ) , then replace the switch.

It is virtually

the kick-down

as the retaining

break during

Valve assembly

if it is re-