Fiat Bravo Service Manual page 230

Hide thumbs Also See for Bravo:

Table of Contents

Bravo-Brava f 0

Removing - refitting

1. Remove the central power unit mount by

unscrewing the bolts retaining it to the

2. Remove the timing end engine mount by

unscrewing the central bolt.

3. Disconnect

mount by unscrewing the retaining bolts

4. Lower the hydraulic jack and remove the

power unit from below the vehicle.

Lower the hydraulic jack gradually

and check that the power unit is cor-

rectly positioned and balanced on the

mounting tool.

Position the power unit on a stand using a

hydraulic hoist.

Use a hydraulic hoist to move the

power unit, once it has been released

To refit the power unit, carry out re-

moval operations in reverse order.

Prepare the engine bay to fit the power

unit. Take care to arrange all electrical

leads, pipes etc. so that they do not get in

the way when the engine is refitted;