Fiat Code - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Electrical equipment

Fiat C O D E

If the procedure has been carried out correctly, i.e. as far as the timing and operations are concerned, if

the ignition key is placed in the ON position, the CODE warning light w i l l go out after coming on initi-

cally for 0.7 seconds, otherwise it will start to flash in rapidly (1.6 Hz); if this is the case, the program-

ming procedure must be repeated.

If a mistake is made (at any time) during the programming procedure, place the ignition key in

the ON position for longer than 2 seconds or in the OFF position for longer than 10 seconds,

then start the key programming procedure again.

Place the MASTER key in the OFF position,

extract it and return it, the key programming

procedure is over.

XI-98 - Update

Print no. 506.670/17