Setting Tp Function Volume Level (Traffic Program) - Fiat Bravo Service Manual

Electrical equipment
Radio equipment
55.
Several transmitters, providing a traffic news service, can be programmed using the station selection
buttons. Follow the instructions in the "Tuning into and programming a transmitter" paragraph, press-
ing the TP button at the beginning to activate the TP function.
As an alternative to the manual programming, it is possible to follow the instructions in the "Automatic
transmitter programming (AUTOSTORE)" paragraph, pressing the TP button at the beginning to acti-
vate the TP function.
Point b)
If you wish to receive traffic news, before inserting the audio cassette or Compact Disc, tune into an
RDS TP transmitter. If, whilst listening to a cassette or a Compact Disc, there is a traffic news flash, the
reproduction of the tape or the Compact Disc will be temporarily halted and then resumed automatically
afterwards.
Point c)
It is possible to receive traffic news even when not listening to the radio. After having tuned into an
RDS TP transmitter and set the volume level at zero, if this transmitter broadcasts traffic news, it can be
heard at a pre-set low volume.
EXPERT
44
Tfl
VOL
XI-98 - Update
N O T E Below are the instructions for carry-
ing out each of the operations illus-
trated in points a), b) and c) men-
tioned previously.
Point a)
To select a transmitter w i t h a traffic news ser-
vice, press the TP button (1) briefly. The
message "TP" will appear on the display.
If the transmitter is not enabled to provide
traffic news, the radio will automatically tune
into the nearest enabled transmitter
broadcast it.
In some countries there are radio
stations which, even though the TP
function is activated, do not trans-
mit traffic news.
Setting T P function volume level (Traffic
Program)
To select the volume for the traffic news,
press the EXP button (1) until the message
"EXPERT" appears on the display. Then
press the " A " (2), " T " (3) buttons until the
display shows the message "TA VOL..". Us-
ing buttons 4 (4) and 5 (5) it is possible to
select the desired volume. The volume can
vary from 5 to 3 1 .
Bravo-Brava
98 range
and
Print no. 506.670/17