Engine
Fuel system
10.
48
Bravo-Brava ^ 16v
F U E L DRIP T R A Y A S S E M B L Y
NOTE /n order to extract the assembly from
the tank, the fuel should not be high-
er than the halfway mark.
Removing-refitting
Proceed with removing the fuel drip tray as-
sembly as follows:
- remove the buttons (arrow) fixing the l u g -
gage
compartment
187807700 and remove it, then lift up
panel cover to gain access to the dust c o v -
er;
- undo the bolts (arrow) and remove the
dust cover;
- disconnect
the
supply
breather pipe (2) and the electrical c o n -
nector (3);
- using tool 1860893000 remove the ring
nut securing the drip tray and extract the
drip tray from the tank, taking care not to
damage the seal.
W h e n refitting, repeat the operations carried
out for the removal in the reverse order; at the
end, make sure that there are no fuel leaks.
98 range
lining
using
tool
pipe
(1),
the
Print no. 506.670/16