Location Of Electronic Unit - Fiat Bravo Service Manual

Bravo-Brava
E L E C T R I C A L / E L E C T R O N I C C I R C U I T
The electrical/electronic circuit for the fuel system basically comprises wiring, an electronic control unit
and the following sensors and actuators:
- Rpm sensor
- Coolant temperature sensor
- Air flow meter
- Intake air temperature sensor
- Instrument injector
- Accelerator lever position sensor
- Fast idle solenoid valve
- Pre-heating control unit
Electronic control unit
The electronic control unit (ECU) is located below the glove compartment (right side) and is connected
to the wiring by means of a 25 pin connector.
It receives all the information relating to the engine running conditions transmitted by the various sen-
sors in addition to atmoshperic pressure information obtained by means of a sensor inside the actual
control unit.
Through this data and with the aid of special programmes, the control unit is capable of carrying out the
following operating strategies:
- injection advance management
- fast idle management
- exhaust gas recirculation management
- air conditioning system management
- heater plugs pre/post heating management
Copyright by Fiat Auto
ft
TD 100
P4A15EJ01
IX 96 O l d i

Location of electronic unit

e <iii<i lepl.irts
E n g i n e
Fuel system
10.
15