Fiat Bravo Service Manual page 822

Hide thumbs Also See for Bravo:

Table of Contents

pump rod on the control pedal.

2. Release the electrical connector s h o w n in

the figure from the pedal mount.

3. Remove the roll pin retaining the brake

servo rod to the control pedal transmis-

4. Remove nuts retaining the pedal unit to

the body, then remove the pedal unit and

servo brake from the body by releasing the

clutch pedal from the clutch pump rod.

5. At the bench, unscrew the four bolts re-

taining the brake servo to the pedal unit.

Braking system

Hydraulic operation

Remove the roll pin retaining the clutch