Selecting Display Modes; Setting Correct Time; Changing Priority Between Display Of Time/Frequency - Fiat Bravo Service Manual

Bravo-Brava

Selecting display modes

Proceed as follows:
- keep the button (6) pressed until the colon between the hours and minutes stops flashing, and the let-
ters " M 1 " or " M 2 " appear depending on the selected display mode;
- press the (1) button to select the other display mode;
- briefly press the button (6) again to confirm the selection; the colon between the hours and minutes
starts flashing again and the letters " M 1 " or " M 2 " disappear.

Setting correct time

M i
I I
M - »
I I
Keep the button (6) pressed until the colon be-
tween the hours and minutes stops flashing and
the letters " M 1 " or " M 2 " appear depending on
the selected display mode;
If the buttons ( 2 - 3 - 4 - 5 ) are pressed briefly, the hours and minutes are increased/decreased by one unit.
Press the buttons for longer to change the hours/minutes display quickly.
Once the correct time has been set, press the button (6) briefly again; this starts from 0 seconds so the
clock can be set accurately. The colon between the hours and minutes starts flashing again and the let-
ters " M 1 " or " M 2 " disappear.

Changing priority between display of time/frequency

Briefly press the button (6) to switch between the display of the clock and the messages relating to the
radio function, for a duration of 10 seconds; after w h i c h the indication w h i c h has priority depending on
the selected display mode w i t h reappear automatically.
Copyright Fiat Auto
M
, O
U WU
I \
I
M O
C
I I U
O P'P O
o
IU
O'O
O P'P O
c O O'O O
Electrical system
O ' O O
O
O'O
O
U'O
O
Adjust the hours and minutes on the display as
follows:
- to decrease the hours press button ( 2 ) ;
- to increase the hours press button ( 3 ) ;
- to decrease the minutes press button ( 4 ) ;
- to increase the minutes press button ( 5 ) .
Radio
55.
9