Tensionamento Cinghia Distribuzione - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Introduction

Planned maintenance

Tensionamento cinghia distribuzione

1. Complete the fitting of the belt in the f o l -

lowing order: 1. Crankshaft gear (already

fitted) - 2. Oil pump gear - 3. Fixed pulley

- 4. Timing pulley, inlet side - 5. Timing

pulley, exhaust side -

6. Automatic tensioner.

Fit the belt with the camshaft pullies

facing towards the right in order to re-

cover any necessary clearance for fit-

ting the belt perfectly on the actual pul-

lies, ensuring the correct tension in the

section of the belt already fitted.

1860876000 for tensioning the timing

belt to be positioned.

3. Acting on tool 1860876000, place the

belt tensioner in the maximum tension p o -

sition, then lock the tensioner nut. Re-

move the dial gauge and tighten the

camshaft pullies to a torque of 11.5 daNm

4. Remove tools 1860874000; rotate the

crankshaft through t w o revolutions in the

direction of rotation, loosen the nut locking

the tensioner and, using a special spanner

on the belt tensioner, position reference

(1) in line with reference ( 2 ) , then tighten

the belt tensioner lock nut to a torque of

As a further check, refit the dial gauge, d e -

1860874000 fit on the camshafts, then re-

fit the components removed previously.

(1) to allow