Removing-Refitting Brake Servo Vacuum Inlet Pipe And One-Way Valve - Fiat Bravo Service Manual

Bravo-Brava 1 0
Copyright Fiat Auto
TD
75
Braking system
Hydraulic operation
R E M O V I N G - R E F I T T I N G
V A C U U M INLET PIPE AND O N E - W A Y
V A L V E
Proceed as described
servo inside the engine bay, but with-
out disconnecting
from the brake servo.
Disconnect the vacuum inlet pipe from the
brake servo.
Disconnect the clip retaining the vacuum
inlet pipe from the vane vacuum pump.
Disconnect the pipe indicated in the figure
from vacuum inlet pipe, then remove the
pipe.
Separate the one-way valve from the vac-
uum inlet pipe. When refitting, position
the valve with the w o r d i n g LATO M O -
TORE turned toward the engine.
3 3 .
B R A K E S E R V O
for the brake
the brake pump
17