Auxiliary units
Climate control
50
( G N D ) El - j •
m
Wiring diagram
10
P4A10CH01
P4A10CH02
1
1 -
;
Frost s e n s o r
The frost sensor is located inside the duc-
t-distributor assembly, fitted directly on the
evaporator
and
detects
warning the control unit, if necessary, to
switch off the compressor to avoid freezing.
It consists of NTC sensor (R at 25°C = 10
kOhm), w i t h an operating range of between
-5°C and +25°C.
Electric fan with electronic speed regulator
This fan w h i c h sends the outside or recircula-
tion air towards the duct-distributor receives
a 12 V supply and is operated at different
speeds continuously by an electronic regula-
tor positioned nearby.
1. Electric
fan
2.
Electronic
regulator
The electronic regulator receives an input
signal from the control unit and transforms it
into a continuously variable power earth sig-
nal to operate the fan.
A.
Electric
fan
B.
Electronic
regulator
C.
Electronic
control
Bravo-Brava
98 range
the
temperature
unit
Print no. 506.670/16