Fiat Bravo Service Manual page 519

Hide thumbs Also See for Bravo:

Table of Contents

Auto transmission and differential

Servicing and adjustments

Lift the gearbox control cable retaining bracket to

release it from the mounting bracket.

Working from inside the car, position the selector

lever on P, remove the retaining bolt on the front

of the selector lever handle and then withdraw the

handle upwards, then remove the selector lever

position indicator panel.

Release the driving mode switch panel, discon-

nect the electrical connectors and withdraw the

Remove the plastic trim from the handbrake lever;

slacken the tension from the relevant cable and dis-

connect the wiring connector for the handbrake on

Place the car on ramps and carry out the f o l l o w i n g

operations from under the car:

5. Remove the heat shield indicated.

6. Disconnect the cables operating the handbrake

from the mounting and release them from the

Publication no. 506.670/06