Removing-Refitting Servo Brake - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Braking system

Hydraulic operation

R E M O V I N G - R E F I T T I N G S E R V O B R A K E

1. Remove the upper cam cover protection.

2. Release the diesel lines from the retaining

clip, then remove the trim s h o w n in the

figure by undoing the retaining bolts.

3. Unscrew bolts retaining the diesel line re-

taining bracket.

4. Disconnect the brake and clutch fluid level

sensor, then remove the stud retaining the

lining of the bulkhead between engine bay

and cabin, then move the lining to one

5. Unscrew the bolts fastening the diesel f i l -

ter bracket, disconnect the connections

shown and position the bracket to one