Removing-Refitting Throttle Cable - Fiat Bravo Service Manual

Engine
Fuel system
10.
56
R E M O V I N G - R E F I T T I N G T H R O T T L E C A -
BLE
Disconnect the battery lead then proceed as
described below:
1. Working from inside the car, disconnect
the throttle cable from its attachment on
the accelerator pedal.
2. In the engine compartment, rotate the
throttle valve lever (1) and disconnect the
throttle cable. Then withdraw the cable
(2) from the mounting bracket.
3. Withdraw the rubber buffer from the a n -
chorage hole on the bulkhead wall, and
withdraw the complete throttle cable.
4. Complete throttle cable.
P4A56IJ0S
Bravo-Brava <0i 16v
When fitting, adjust the throttle cable
as described in the "Adjusting throt-
tle cable" section.
Publication no. 506.670/14
'98 range