Removing-Refitting Safety Control Unit; Removing-Refitting Gearbox Oil Cooling Radiator And Fan - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Bravo-Brava lfi|

Auto transmission and differential

Servicing and adjustments

R E M O V I N G - R E F I T T I N G

T R O L UNIT

The safety control unit is located under the

front passenger's seat. To remove it, first dis-

connect the battery's negative pole, then pro-

ceed as described below:

Push the front passenger's seat fully back

so as to gain access to the safety control

unit. Undo the bolts securing the control

unit to the body shell, disconnect the sup-

ply wiring connector, then remove the

control unit.

R E M O V I N G - R E F I T T I N G

COOLING RADIATOR AND FAN

Place the car on ramps, disconnect the bat-

tery's negative pole, remove the front left

wheel, drain the gearbox oil and then pro-

ceed as described below:

2. Remove the air intake duct by undoing the

bolts shown in the figure, securing it to

the front cross panel.

3. Disconnect the cooling fan supply wiring

4. Raise the car and, working from the left

wheelarch, undo the bolts securing the

cooling fan, then remove the fan.

G E A R B O X