Fiat Bravo Service Manual page 529

Hide thumbs Also See for Bravo:

Table of Contents

Auto transmission & differential

Removing-refitting

1. Remove the nuts securing the fuse and re-

lay box to the battery cage, then move the

box over to one side.

2. Disconnect the i.e. control unit supply

3. Disconnect the earth cable (1), remove the

nuts securing the i.e. control unit mounting

bracket, then remove the control unit from the

engine compartment. The nuts indicated also

secure the starter motor supply cables and the

front cable/fuel injection cable connection.

4. Remove the bolts (1) and slacken the bolt

(2) securing the battery cage to the body

shell. Before removing the cage, disconnect

the cable retaining clip underneath.

5. Remove the split pin and washer shown in

the figure; lift the gear change control ca-

ble head so as to disconnect it from the

gear change lever position sensor.

Bravo-Brava ft ^

Publication no. 506.670/07