Dismantling-Reassembly - Fiat Bravo Service Manual

Auto transmission & differential
Drive shafts
21-27.
64
Bravo-Brava
1. Rotate the vertical link in order to w i t h -
draw the drive shaft from the wheel hub
(repeate the procedure for the other side).
2. Disconnect the drive shaft on the gearbox
side from the differential, levering on the
anchorage point.
3. Disconnect the drive shaft on the timing
gear side from the differential, levering on
the anchorage point.
NOTE When refitting, reverse the procedure for
removal, tightening the wheel hub nut to
the specified torque.
A
To remove and refit the drive
bear in mind the warnings
under removing-refitting
box.
D I S M A N T L I N G - R E A S S E M B L Y
4. Place the drive shaft in a vice, then remove
the clips retaining the protective gaiter on
the sliding joint on the gearbox side.
ft
16v
shafts,
mentioned
the gear-
Publication no. 506.670/07